|
Re: 600 ace won't start
[Re: victor#0]
#8017910
12/11/23 03:12 AM
12/11/23 03:12 AM
|
Joined: Apr 2018
Posts: 766 Bush Alaska
victor#0
OP
trapper
|
OP
trapper
Joined: Apr 2018
Posts: 766
Bush Alaska
|
Yes turns over just wont fire up. Checked the battery and ground. The relay is a shot in the dark but a buddy of mine said it's happed to him a few times. It ran great till it dropped sub zero so i'm thinking maybe water in fuel.
Last edited by victor#0; 12/11/23 03:13 AM.
|
|
|
Re: 600 ace won't start
[Re: victor#0]
#8018316
12/11/23 03:22 PM
12/11/23 03:22 PM
|
Joined: Sep 2013
Posts: 1,125 AK
FL cracker in AK
trapper
|
trapper
Joined: Sep 2013
Posts: 1,125
AK
|
I've had the in tank fuel filters clog up and cause that.
Psalm 34:6
|
|
|
Re: 600 ace won't start
[Re: victor#0]
#8019078
12/12/23 02:19 PM
12/12/23 02:19 PM
|
Joined: Apr 2007
Posts: 378 fairbanks,ak.
isnarewolves
trapper
|
trapper
Joined: Apr 2007
Posts: 378
fairbanks,ak.
|
Do you have spark? I also seen the line in the tank rotted.
Last edited by isnarewolves; 12/12/23 02:21 PM.
Life is hard. It's even harder if your stupid!
|
|
|
Re: 600 ace won't start
[Re: victor#0]
#8019180
12/12/23 05:42 PM
12/12/23 05:42 PM
|
Joined: Apr 2016
Posts: 801 Labrador, Canada
crosspatch
trapper
|
trapper
Joined: Apr 2016
Posts: 801
Labrador, Canada
|
Put the relay back and tried it a few times, now the engine light comes on with 4 short beeps- engine fault see dealer. Had similar. Get booster cables and ground from the negative post to the running board. Positive cable not need to be connected. If starts then ground your problem. I know you said you checked the ground but just in case try above unless you already checked that way.
|
|
|
Re: 600 ace won't start
[Re: victor#0]
#8019823
12/13/23 12:43 PM
12/13/23 12:43 PM
|
Joined: Dec 2006
Posts: 2,741 SW Alaska
otterman
trapper
|
trapper
Joined: Dec 2006
Posts: 2,741
SW Alaska
|
Sounds like you need to change the filter sock in the tank or the pump itself the filter sock is the most common problem with them when it comes to fuel issues especially if you are using heet there kinda a PIA to change out but can be done there is an inline filter that you will see when changing the sock make sure and change it at the same time at least on the newer models
We get out of life only as much as we really want and work hard enough to achieve
|
|
|
|
|
|