Hagz 110 coni bracket problem
#6710429
12/29/19 10:36 PM
12/29/19 10:36 PM
|
Joined: Aug 2019
Posts: 289 Michigan
Duckie1
OP
trapper
|
OP
trapper
Joined: Aug 2019
Posts: 289
Michigan
|
Anyone else have a problem with 110’s constantly misfiring after the installation of hagz brackets. I have about 40 traps setup with them to test them and the brackets work good for trap placement, but the traps keep misfiring. My traps were all prepped the same way except the other 40 or so don’t have brackets and are not misfiring. Anyone else have this issue and find a solution?
Last edited by Duckie1; 01/07/20 10:26 PM.
|
|
|
Re: Hagz 110 coni bracket problem
[Re: Duckie1]
#6710887
12/30/19 02:51 PM
12/30/19 02:51 PM
|
Joined: Dec 2006
Posts: 17,669 Rodney,Ohio
SNIPERBBB
trapper
|
trapper
Joined: Dec 2006
Posts: 17,669
Rodney,Ohio
|
i would look closely at the contact the trigger is making with the dog when you try to set it.Something isnt allowing the dog to seat on the jaw properly. Try setting the trap but instead of placing the dog on the trigger, set, or try to set, it on the jaw so it cant fire. If the trap does stay set, the problem is on the trigger itself. If it doesnt stay set that way, the notches on the dog are too tight and need enlarged slightly with a round file.
Last edited by SNIPERBBB; 12/30/19 02:51 PM.
|
|
|
Re: Hagz 110 coni bracket problem
[Re: Duckie1]
#6717947
01/05/20 10:21 PM
01/05/20 10:21 PM
|
Joined: Dec 2006
Posts: 1,568 Southern, MI
HAGz
trapper
|
trapper
Joined: Dec 2006
Posts: 1,568
Southern, MI
|
Duckie, feel free to contact us at anytime if you think our product(s) are causing an issue. We will make it right with you or try and help you overcome the problem.
Technically, it would be nearly impossible for the clip, on the end of the spring to affect the dog/trigger sensitivity. That said, if those BMI's are lightly triggered, it could be possible if you have excessive movement of the trap/rod the combination of the movement, current, bait drag, etc could be causing a miss-fire.
Again, please contact us at info@j3o.com and we will gladly help you out.
--- HAGz J3 Outdoorz - HAGz Brand Trapping Products www.j3o.com
|
|
|
Re: Hagz 110 coni bracket problem
[Re: AJE]
#6719300
01/07/20 11:05 AM
01/07/20 11:05 AM
|
Joined: Dec 2006
Posts: 1,568 Southern, MI
HAGz
trapper
|
trapper
Joined: Dec 2006
Posts: 1,568
Southern, MI
|
HAGz always has top notch customer service from my experience. Thank you AJE
--- HAGz J3 Outdoorz - HAGz Brand Trapping Products www.j3o.com
|
|
|
Re: Hagz 110 coni bracket problem
[Re: Duckie1]
#6720384
01/07/20 11:30 PM
01/07/20 11:30 PM
|
Joined: Dec 2019
Posts: 172 Indiana
Backbreaker
trapper
|
trapper
Joined: Dec 2019
Posts: 172
Indiana
|
Tried Snipers' idea the traps stayed set when the dog was set directly on the jaw. I filed the last two notches on several traps and that seems to have solved the problem the dog engages the jaw/trigger system better and the traps do not misfire any more. I've never figured out an economic way to stake the Hagz. Doesn't seem worth it. What do you use?
|
|
|
Re: Hagz 110 coni bracket problem
[Re: Duckie1]
#6721849
01/09/20 06:10 AM
01/09/20 06:10 AM
|
Joined: Jan 2016
Posts: 10,105 WI - Wisconsin
AJE
trapper
|
trapper
Joined: Jan 2016
Posts: 10,105
WI - Wisconsin
|
HAGz sells long thin gray fiberglass rods that are nice in certain situations such as deep h20. He's the only retailer I've ever seen sell the long thin ones. I wish I would have bought more. Maybe he'll be at our convention this Fall.
Last edited by AJE; 01/09/20 06:11 AM.
|
|
|
Re: Hagz 110 coni bracket problem
[Re: AJE]
#6721986
01/09/20 09:32 AM
01/09/20 09:32 AM
|
Joined: Dec 2006
Posts: 17,669 Rodney,Ohio
SNIPERBBB
trapper
|
trapper
Joined: Dec 2006
Posts: 17,669
Rodney,Ohio
|
HAGz sells long thin gray fiberglass rods that are nice in certain situations such as deep h20. He's the only retailer I've ever seen sell the long thin ones. I wish I would have bought more. Maybe he'll be at our convention this Fall. Hit em at the NTA.
|
|
|
Re: Hagz 110 coni bracket problem
[Re: Duckie1]
#6723676
01/10/20 04:38 PM
01/10/20 04:38 PM
|
Joined: Dec 2006
Posts: 1,568 Southern, MI
HAGz
trapper
|
trapper
Joined: Dec 2006
Posts: 1,568
Southern, MI
|
Hi guys. Tractor supply sells 4' rods for $1.29 last I looked. We do carry the 6' rods for $33/doz and have worked to get shipping at reasonable prices, but best is to pick up at a convention if you want the 6' rods. We haven't made our schedule yet but will certainly be at the NTA, we are also going to attend the Minnesota convention and North Carolina conventions this year. Initial cost is high but it looks like I will get many years out of them. Duckie, the rods we carry are the rods with sunguard and have a 10 year mfg warranty. I have some I have used for well over 10 years, more likely 15 with zero issues.
--- HAGz J3 Outdoorz - HAGz Brand Trapping Products www.j3o.com
|
|
|
Re: Hagz 110 coni bracket problem
[Re: Duckie1]
#6723852
01/10/20 07:56 PM
01/10/20 07:56 PM
|
Joined: Jan 2016
Posts: 10,105 WI - Wisconsin
AJE
trapper
|
trapper
Joined: Jan 2016
Posts: 10,105
WI - Wisconsin
|
I'll try to get more of those special 6' rods next time I see you in Marshfield.
Last edited by AJE; 01/10/20 07:57 PM.
|
|
|
Re: Hagz 110 coni bracket problem
[Re: AJE]
#6726653
01/12/20 09:31 PM
01/12/20 09:31 PM
|
Joined: Dec 2006
Posts: 1,568 Southern, MI
HAGz
trapper
|
trapper
Joined: Dec 2006
Posts: 1,568
Southern, MI
|
I'll try to get more of those special 6' rods next time I see you in Marshfield. Sounds good AJE!
--- HAGz J3 Outdoorz - HAGz Brand Trapping Products www.j3o.com
|
|
|
|
|