Does any one have a recommendation for a good powder for the 308 I recently picked up?

Other than powder, I have everything I need to start developing loads, I bought some 130 grains Barnes TTSX, 150 grain Barnes (TSX),165 grain Barnes TTSX, and 165 grain Hornady CX. (Remember, all lead free for the great state of California). At least I found www.submoashooting.com where you can buy samples of 12 bullets instead of a box of 50 for load development.

Thanks guys!

As soon as I get home I’ll post mine for that bullet. I use it in 5 different 308s.

IMR 3031 is pretty good in mine

That's what I used, and I got good results. I shot 110 grain spire, 130 grain hollow points and 150 grain spire.

H4895 or IMR4895

Google "308 load data"

I stumbled upon Varget several years ago. Very consistent regardless of temperature as I shoot it all year long from ground hogs to deer. I shoot 165 Noslers BT at 44.0 grains and 155 lapua Scenar at 44.5 grains. They are not barrel burners but are very repeatable. Remginton 700 VS 24" barrel and both shoot 1/4" or better at 100 yards and this past Sunday put up a 1 1/2" 5 shot group at 500 yards after cleaning and then fouling the barrel.

PREDATOR Loads (light weight, fast velocity) MILITARY Duplicate Loads HEAVY Bullet Loads
Benchmark H335® IMR 8208 XBR H322 IMR 3031® BL-C(2) IMR 4895 H4895 Varget IMR 4064® CFE 223 Varget® IMR 8208 XBR IMR 4064® Winchester 748

I like Varget and Benchmark for my 308

Varget pushing a 178 eldX is my current recipe. Does the job nicely

I use H4895

works in 223 , 30-06 , 30-30 , 308 all reasonably well and for your gas guns doesn't make to much gas port pressure for service rifles

42.5gr under 180gr Speer BTSP avg mv 2625fps work up to that it is a half grain under book max

I do wish it was as easy to find as it used to be.

Win.748, varget

I've always used 3031. At least 50 years now.

can anyone help or advise how to send bullets to Russia from this store www.submoashooting.com.

you need a friend in a country that can buy them , repackage and send to a country that will still ship to Russia , I hear Finland has some trade with Russia yet

nothing is leaving the US headed for Russia directly.
my wife ships farm implement parts to Russia , had 2 containers that left just days before the Ukraine thing kicked off it got turned around when it made it to the exit port and sent back

Hmmm, KOSOI - have you checked with your mail service for any restrictions on your end ? Then I would ask any of the reloading supply businesses, such as Midwayusa, Graff & Sons, etc.

thank you. I'll check it out.

if it is not difficult to write me in PM. I have no possibility to start a dialog with you.

3031
4895