JB weld - Trapperman Forums

No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter

Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting~The Pen and Quill

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum~ Fermenter's Forum

~~~ Dobbins' Products Catalog ~~~

Minnesota Trapline Products

Please support our sponsor for the Trappers Talk Page - Minnesota Trapline Products

Register Log In Home Forums Trapper Talk JB weld

Print Thread

Hop To

Page 2 of 2

1

2

Re: JB weld [Re: AKAjust] #8086667 02/26/24 12:48 PM 02/26/24 12:48 PM
Joined: Dec 2006 Posts: 15,744 MN, Land of 10,000 Lakes T Trapper7 trapper
Trapper7 trapper T Joined: Dec 2006 Posts: 15,744 MN, Land of 10,000 Lakes	I had a leak on the filler hose of my old 83 Dodge 1Ton pickup. I didn't want to weld or solder it being it is attached to the gas tank. I used JB Weld on it and it has held up for the past 10 years or so with no leaks. I think the key is to sand the surface so it's clean and dry first. The difference between animals and humans is that animals would never let the dumbest ones lead the pack.

Re: JB weld [Re: AKAjust] #8086700 02/26/24 01:43 PM 02/26/24 01:43 PM
Joined: Jun 2010 Posts: 16,386 Iowa ~ADC~ The Count
~ADC~ The Count Joined: Jun 2010 Posts: 16,386 Iowa	Similar to what GCP said. Clean and degrease it, do my best to sand in there, (I'd spray with brake kleen, and wrap some sand paper on a screw driver or something if I didn't have a drimmel tool to fit in there.),,, then put some JB in that void to hold a short piece of flat steel that fits the void where the red is. Let it set up, drill for pins, then fill the whole void. If that doesn't hold then I'd order the part like was suggested.

Re: JB weld [Re: ~ADC~] #8086702 02/26/24 01:45 PM 02/26/24 01:45 PM
Joined: Sep 2013 Posts: 18,626 Green County Wisconsin G GREENCOUNTYPETE trapper
GREENCOUNTYPETE trapper G Joined: Sep 2013 Posts: 18,626 Green County Wisconsin	Originally Posted by ~ADC~ Similar to what GCP said. Clean and degrease it, I'd spray with brake kleen, then put some JB in that void to hold a short piece of flat steel that fits the void where the red is. Let it set up, drill for pins, then fill the whole void. If that doesn't hold then I'd order the part like was suggested. thanks for drawing what I was saying America only has one issue, we have a Responsibility crisis and everything else stems from it.

Re: JB weld [Re: AKAjust] #8086703 02/26/24 01:46 PM 02/26/24 01:46 PM
Joined: Jun 2010 Posts: 16,386 Iowa ~ADC~ The Count
~ADC~ The Count Joined: Jun 2010 Posts: 16,386 Iowa	No problem Pete.

Re: JB weld [Re: AKAjust] #8086863 02/26/24 06:32 PM 02/26/24 06:32 PM
Joined: Dec 2006 Posts: 11,932 Oakland, MS Drifter trapper
Drifter trapper Joined: Dec 2006 Posts: 11,932 Oakland, MS	One down side to usint JB for a mend. If plan to weld it later it will be hard to clean it off good enough to weld. Some individuals use statistics as a drunk man uses lamp-posts — for support rather than for illumination. Andrew Lang (1844-1912) Scottish poet, novelist and literary critic Life member NTA , and GA Trappers assoc .

Page 2 of 2

1

2

Moderated by 330-Trapper, Bogmaster, Cindy, cotton, Drifter, Maddog47, Paul Dobbins, USMC47 🦫, Wolfdog91

Powered by UBB.threads™ PHP Forum Software 7.7.1