Added a roller to my food plot drill
#6309398
08/24/18 10:49 AM
08/24/18 10:49 AM
|
Joined: Dec 2015
Posts: 1,028 West Cent IL
illinideer
OP
trapper
|
OP
trapper
Joined: Dec 2015
Posts: 1,028
West Cent IL
|
Been wanting to do this for a while made this out of a galvanized water tank I found in inlaws junk pile. I welded 10 pieces of 3/4 inch angle iron length wise to give the ground some texture and filled it with sand. One less trip around the plots now. I added a set of 3 point pins so I can pick it up to transport down the road. I planted about 6 acres of winter rye and then broadcast red clover and rolled one more time plus just got a nice rain this morning
Coyote 5 Badger 1 Coons 17 Bobcats 2 Released Grinners All of them USN AE2 VF-31 Tomcatters Retired SMSGT IL ANG 183 Fighter Wing Coyote U Class #4
|
|
|
Re: Added a roller to my food plot drill
[Re: illinideer]
#6309422
08/24/18 11:47 AM
08/24/18 11:47 AM
|
Joined: Dec 2015
Posts: 1,028 West Cent IL
illinideer
OP
trapper
|
OP
trapper
Joined: Dec 2015
Posts: 1,028
West Cent IL
|
Frame is 3 inch channel, 7/8 rod through center of tank and welded and some pillow block bearings from farm store. Tractor is a 1964 Ford 2000 J
Last edited by illinideer; 08/24/18 11:49 AM.
Coyote 5 Badger 1 Coons 17 Bobcats 2 Released Grinners All of them USN AE2 VF-31 Tomcatters Retired SMSGT IL ANG 183 Fighter Wing Coyote U Class #4
|
|
|
Re: Added a roller to my food plot drill
[Re: illinideer]
#6309439
08/24/18 12:50 PM
08/24/18 12:50 PM
|
Joined: Jan 2017
Posts: 330 MO
Timber Hole
trapper
|
trapper
Joined: Jan 2017
Posts: 330
MO
|
I really like this idea. I need a cultipacker but don’t want to spend a bunch of money on it. Never thought about making the ridges perpendicular to the row instead of parallel. Well done!!
L1x1x1/8 is a common angle used for bridging on steel joists. 60 lf would weigh 48 lbs and have a wholesale value of about $25.00 and a retail value of about $45.00. For those that don’t buy a lot of steel know that you’re just paying for weight. As an example I see people buy L3x3x1/4 when they could get L3x3x3/16 for 3/4 of the money and 95% of the time the thinner material is more than adequate. Just a tip to keep the cost of the project down.
Last edited by Timber Hole; 08/24/18 12:51 PM.
|
|
|
Re: Added a roller to my food plot drill
[Re: illinideer]
#6309448
08/24/18 01:23 PM
08/24/18 01:23 PM
|
Joined: Sep 2009
Posts: 293 Barron Couny, WI
John Deere Steve
trapper
|
trapper
Joined: Sep 2009
Posts: 293
Barron Couny, WI
|
Looks a lot like the one I built. Made mine from an old 60 gallon air compressor tank. Welded a fitting in the end so I can fill it with water to add weight. Mine is 3pt mounted though. Scavenged for materials and have less than $20 into it.
Poor planning on your part does not constitute an emergency on mine!
|
|
|
Re: Added a roller to my food plot drill
[Re: illinideer]
#6309450
08/24/18 01:31 PM
08/24/18 01:31 PM
|
Joined: Dec 2012
Posts: 1,150 Valders, WI
Alex the dog
trapper
|
trapper
Joined: Dec 2012
Posts: 1,150
Valders, WI
|
illinideer, like the cultipacker but more curious about the planter. It doesn't appear to be a standard 8' drill, was it something you cut down in size or found an OEM 6 footer?
Thanks,
Dave
Last edited by Alex the dog; 08/25/18 09:13 AM.
Forever in debt to my Father who introduced me to trapping. May I be half the man he was.
|
|
|
Re: Added a roller to my food plot drill
[Re: illinideer]
#6309891
08/25/18 05:58 AM
08/25/18 05:58 AM
|
Joined: Dec 2012
Posts: 1,150 Valders, WI
Alex the dog
trapper
|
trapper
Joined: Dec 2012
Posts: 1,150
Valders, WI
|
Thank you for the pictures and explanation.
Dave
Forever in debt to my Father who introduced me to trapping. May I be half the man he was.
|
|
|
Re: Added a roller to my food plot drill
[Re: Tim Wilcox]
#6309950
08/25/18 08:49 AM
08/25/18 08:49 AM
|
Joined: Dec 2015
Posts: 1,028 West Cent IL
illinideer
OP
trapper
|
OP
trapper
Joined: Dec 2015
Posts: 1,028
West Cent IL
|
What is the Tractor ? Is that a Jubilee ? Here's my Jubilee raking hay this summer. 1964 ford 2000
Coyote 5 Badger 1 Coons 17 Bobcats 2 Released Grinners All of them USN AE2 VF-31 Tomcatters Retired SMSGT IL ANG 183 Fighter Wing Coyote U Class #4
|
|
|
|
|