Hawley and Norton trap?!
#5777072
01/18/17 04:02 PM
01/18/17 04:02 PM
|
Joined: Feb 2014
Posts: 7,978 On Georgian Bay, Ontario Canad...
Hutchy
OP
trapper
|
OP
trapper
Joined: Feb 2014
Posts: 7,978
On Georgian Bay, Ontario Canad...
|
Picked up a few odd balls today.
A number four sized trap. Toothless jaws, spitting image of a number four newhouse, with "Hawley & Norton" and "made in Canada" the rest is about unreadable. Any ideas on a value? Chain is half there, and is unlike the chain on a 114.
Also got a regular raised panel number four, "Oneida newhouse animal trap co, lititz PA, reg. Us. Pat. Off #4"
Also a little number one. Nothing on the pan but the usual Victor "v", but it is dogless, and a cross section of the jaws looks like an L. as in, the jaws were made of angle stock, not flat stock.
Any more info on there traps would be appreciated.
|
|
|
Re: Hawley and Norton trap?!
[Re: Hutchy]
#5779193
01/20/17 10:18 AM
01/20/17 10:18 AM
|
Joined: Jan 2014
Posts: 172 North East Texas
Matt58
trapper
|
trapper
Joined: Jan 2014
Posts: 172
North East Texas
|
So, I have figured out the Hawley and Norton isn't anything special, but what about the doses Victor? The jaws are bent as to basically make the trap sort of like. They are laminated. More surface.area. and dogless...Any ideas? could be an Oneida All Steel some one put victor pan on...
|
|
|
Re: Hawley and Norton trap?!
[Re: Hutchy]
#5802700
02/06/17 02:04 PM
02/06/17 02:04 PM
|
Joined: Feb 2014
Posts: 7,978 On Georgian Bay, Ontario Canad...
Hutchy
OP
trapper
|
OP
trapper
Joined: Feb 2014
Posts: 7,978
On Georgian Bay, Ontario Canad...
|
Huh. I was of the impression the double jaw Victor was a Victor all steel.
I described the trap incorrectly in my original post.
So, to get this straight, the double jaw trap is a Victor 1.5 double jaw, and the one closest to the camera is an oneida all steel?
Last edited by Hutchy; 02/06/17 02:07 PM.
|
|
|
|
|