Re: Question about a rivet pan Newhouse
[Re: DiggerDale]
#5493217
04/12/16 05:40 PM
04/12/16 05:40 PM
|
Joined: Dec 2006
Posts: 4,411 Iowa
PaulB
trapper
|
trapper
Joined: Dec 2006
Posts: 4,411
Iowa
|
Personally in my years of collecting, I would say I have had just as many of the large bottom eyed springs that were stamped as I have found that were not stamped. You should have stayed chasing them gobblers, cause you just took the strut right outa this turkey! Someday I'm gonna come up with something rare.... Good post Bruce, thanks Dale,, I learned something a long time ago,,,even the smallest collector sooner or later will have something even the most advanced collector does not have,,,I always figured FUN was the key word and I have had my share,,,,
|
|
|
Re: Question about a rivet pan Newhouse
[Re: longbow31]
#5493308
04/12/16 07:33 PM
04/12/16 07:33 PM
|
Joined: Jul 2007
Posts: 1,334 Missouri
Nhousecattrapper
trapper
|
trapper
Joined: Jul 2007
Posts: 1,334
Missouri
|
Dale, you can't even talk Bruce out of the last French fry on his plate lol! Dustin, that little gal that served us at the café that day grabbed that last fry before you could get it. Paul on the fun part I guess you were talking about traps, but I don't want to ask buddy.
"PURVEYOR OF FINE ANTIQUTIES and RARE TRAPS". Member... MTA/CFM/NTA/NRA/NATCA #0620
|
|
|
Re: Question about a rivet pan Newhouse
[Re: Nhousecattrapper]
#5493365
04/12/16 08:18 PM
04/12/16 08:18 PM
|
Joined: Dec 2006
Posts: 4,411 Iowa
PaulB
trapper
|
trapper
Joined: Dec 2006
Posts: 4,411
Iowa
|
Dale, you can't even talk Bruce out of the last French fry on his plate lol! Dustin, that little gal that served us at the café that day grabbed that last fry before you could get it. Paul on the fun part I guess you were talking about traps, but I don't want to ask buddy. Bruce ,,, at my Age I take fun ANY WHERE I can get IT,,,,,,
|
|
|
Re: Question about a rivet pan Newhouse
[Re: jhunter15]
#5493380
04/12/16 08:32 PM
04/12/16 08:32 PM
|
Joined: Jul 2007
Posts: 1,334 Missouri
Nhousecattrapper
trapper
|
trapper
Joined: Jul 2007
Posts: 1,334
Missouri
|
New old stock...great trap Bruce Jake, I guess you referring to Paul and I on the New old Stock. Right buddy?
"PURVEYOR OF FINE ANTIQUTIES and RARE TRAPS". Member... MTA/CFM/NTA/NRA/NATCA #0620
|
|
|
Re: Question about a rivet pan Newhouse
[Re: DiggerDale]
#5493447
04/12/16 09:22 PM
04/12/16 09:22 PM
|
Joined: Dec 2006
Posts: 4,411 Iowa
PaulB
trapper
|
trapper
Joined: Dec 2006
Posts: 4,411
Iowa
|
Defiantly old stock here,,,,but a Long way fom new,,,in fact just about out of warranty
|
|
|
|
|