ADC Trapper Forum

No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum


~~~ Dobbins' Products Catalog ~~~


WCS
(Please support Wildlife Control Supplies, our sponsor for the ADC Page)






Topic Options
Hop to:
#3260431 - 08/06/12 10:54 AM bat exclusion?
iayogi17 Offline
trapper

Registered: 12/16/07
Posts: 782
Loc: N Central Iowa. 37yrs
How concerned should I be about bats using this area (the pick) of a metal roof which is laid over an old roof?



_________________________
Brad Mohr

Top
#3260457 - 08/06/12 11:12 AM Re: bat exclusion? [Re: iayogi17]
DaveK
Unregistered


If there is a gap, they will find it.

Top
#3260511 - 08/06/12 12:00 PM Re: bat exclusion? [Re: iayogi17]
iayogi17 Offline
trapper

Registered: 12/16/07
Posts: 782
Loc: N Central Iowa. 37yrs
that what I was thinking thanks
_________________________
Brad Mohr

Top
#3260965 - 08/06/12 06:41 PM Re: bat exclusion? [Re: iayogi17]
Bob Jameson Offline



Registered: 12/25/06
Posts: 2325
Loc: SW Pa
Some good roofers put the foam inserts into the void areas, others do not.You need to inspect each vented side by crawling across the ridge and examining them individually very well to determine the possibility of access and do a watch to determine any exiting of the bats from these areas.

Cobra vent pieces cut to size will seal these open vented areas nicely then sealed into position with some silicone.You also need to inspect the end runs also on the rake sides to see if these ends are sealed.
_________________________
www.jamesonsultrablend.com
www.wcsbatcontrol.com

Wildlife Pest Control Services

Top
#3261695 - 08/07/12 07:50 AM Re: bat exclusion? [Re: iayogi17]
iayogi17 Offline
trapper

Registered: 12/16/07
Posts: 782
Loc: N Central Iowa. 37yrs
I climbed up there an had a look-see, there is some foam inserts in part and others are missing. the ends need a lil help too.
_________________________
Brad Mohr

Top
#3263314 - 08/08/12 07:29 AM Re: bat exclusion? [Re: iayogi17]
traprjohn Offline
trapper

Registered: 12/23/06
Posts: 2480
Loc: Central NC
If it was recently roofed, I'd ask the roofer for pcs to replace the missing and go from there.

It worked for me!
_________________________
The 10 Commandments are not suggestions...

Maker of trappers tools and gear. Have an idea? Let's talk!

Buy a soldiers meal next chance you get.

Top
#3263580 - 08/08/12 10:59 AM Re: bat exclusion? [Re: iayogi17]
Indiana_Red Offline
trapper

Registered: 10/21/10
Posts: 190
Loc: Indiana
I do roofing for a living and there should of been foam inserts put in the whole length of the ridge cap. Also has to have it in the ends of the runs or critters will find away in. I would ask the contractor to come back out and fix the problem
_________________________
Proud member of NTA, ISTA, UTK, FTA, and FTA 7b

Top
#3266286 - 08/10/12 12:45 AM Re: bat exclusion? [Re: iayogi17]
Vinke Offline
trapper

Registered: 12/22/06
Posts: 4376
Loc: (This word is unacceptable on ...
pull all the foam,,,,,, it is "chewable"............

There is one manufacture that makes bat proof venting ridge closure material molded specifically for all the different profiles of metal roof panels manufactured,,,,,, PM me if you want the contact info
_________________________
Living life like a billionaire

www.wawildlife.com

www.azrats.com

Top
#3269054 - 08/11/12 08:02 PM Re: bat exclusion? [Re: iayogi17]
iayogi17 Offline
trapper

Registered: 12/16/07
Posts: 782
Loc: N Central Iowa. 37yrs
I can say one thing if all roofers did a great job reroofing I'd have way less bat work
_________________________
Brad Mohr

Top