hey i am wandering what size of streatcher does a skunk need to go on? would a racoon be a good streatcher or not thanks!

If its wood it is prefered that skunks get put on fox size stretchers

all i have are wired streatchrs...? so yeah i have some yotes wouldnt those be to big?

but like so what size would i need for them? coon size or what?

Fox board size is best, because skunks have a narrow neck on them. Coon is to wide unless you use wire stretchers and then you need to bend the stretcher in in thre neck area.
You can get away with stretching skunks 6 to 6 1/2 inches wide at the base.

ok thanks that is what i have been wanting to know!

I believe Grawe sells a skunk stretcher too. Most guys I know use a #23 wire stretcher.

http://www.fntpost.com/Products/Wire+Stretchers/Sleepy+Creek+23+Wire+Stretcher

Yea you can buy skunk boards now. Matter of fact i will be heading out here soon to buy some. They are the same size as fox boards but the neck isnt as wide as the fox boards

I use a rat stretcher.