It,s a Replica,Norwich Wire Works never made a Zero.Just wanted to see what one would look like.Bruce

So what would a Victor #0 jump trap be worth? Would it be a place to start collecting?

Value will depend on condition and where it was made.

A # 0 Oneida jump made by Animal Trap Company would be a perfect place to start a collection. You should be able to get one in very good/almost new condition for $10.00 or less.

Not a super valuable trap but start small and work your way up to the more expensive traps - # 0 Sargent with cast pan or # 0 Arrow with clear stamping.

Enjoy your new hobby/addiction.

Thanks, gives me ideas.

I think I figured out how to add the pic's. There are 3,,, one shows the 0 with the T in the pan and a 1.5 with the T in the pan. The 0 pan is better than the 1.5 but my picture is poor. The other is the Triumphs with the 2 hole model. An 0 and a 1. I have about 3 sets of them from the 1.5 , 1 and the 0. Pa
ns are pretty good on them all. Then there is that Victor Special 11 I talked about with the Butterfly dog. I have 3 and 1 has a good pan. Is it worth anything? Thanks to Wissmiss, Jim and Jody for their comments and knowledge. I want to really acknowledge their help. I the other pictures are too big so will have to send in a new post. Mike

Victor # 11 butterfly in good shape can go for $50 or more

My zero's :
Sargent ls cast pan
B&L ls post
3-B&L jump different chain swivels
Victor jump cast jaws
Kangaroo jump
2-Gibbs king bee coil
Victor dls w/clutches
Victor coil
Herters coil
Victor ls stoploss
B&L ls hump cross
00 Victor mini ls
jump w/2h hole skul pan unknown
also have 2 traps that have a 0 jump inside of a l.s. trap
one says 41 one says double shot any particular ones I need to send pics?
rice copy of clutch trap
dozen Victor jumps that I still use

peaver - would love to see pictures of you zero traps. Especially the Victor coil and the Victor long spring stop loss.

Thanks.

I would too

L nto R...victor jump,Blake&Lamb jump,victor coil,unknown jump,gibbs king bee coil

this one I got from Waseca in 1972 they had it on the counter asked if it was for sale...guy gave it to me....it helped that my dad was buying a 41AX...

Your unknown under spring with the 2 hole pan is a Blake & Lamb.

Peaver that Victor #0 Victor Stoploss is a really cool trap, I didn't know that they made them.

I don't really know who made it or when but its all factory parts...nothing home made...just wish someone wouldn't have punched the holes in the pan

Peaver - on the # 0 stop loss, how long is the bottom piece, measured from end to end. Thanks.

I don't see any holes in the stop loss pan. If you are talking about the "unknown jump" in a previous picture - those 2 holes are supposed to be there. Factory original. It is called "two hole pan model". Duh. Several other brands have similar "two hole pan models". Triumph is one that comes to mind.

that is what I suspected...although it has different rivets and post than the b&l but spring looks the same

oh sorry..the 2 holes are in the 0 coil...the stoploss is exactly same as regular 0 ls

this is the #0 Blake and Lamb jump that I have. was using it as a pocket gopher trap up until now. Should I hang it on the wall or keep using it as a gopher trap.

Peaver, can you post a pic of your Rice copy of a clutch trap.Thanks Bruce