Trap Preparation Archive


Home ~ Mission Statement ~ Trap Talk ~ ADC Forum ~ Trap Shed ~ Trap Chat
Trapper Tips ~ Links ~ Gallery ~ Basic Sets ~ Convention Calendar ~ Trapper's Humor
Fur Buyers Directory ~ Trapper's Tales ~ Words From The Past ~ Legends ~ Archives~Lure Formulator Forum
~Catalog~

Topic Options
Hop to:
#532087 - 01/21/08 03:32 PM MODs - Bench Vise Baseplate Jig diagram
KYBOY Offline
trapper

Registered: 12/22/06
Loc: East, Kentucky
Hopefully you can make sense of this diagram. If not speak up and Ill try my best to clarify. grin You really need a 6" or better vise for using it with 1/8th inch flatstrap. If your doing 3/16th you need a bruiser 10" vise or there abouts. It does work though wink
_________________________
Deep in the heart of Appalachia....

Top
#532150 - 01/21/08 03:57 PM Re: Bench Vise Baseplate Jig diagram [Re: ]
EduMan Offline
trapper

Registered: 11/06/07
Loc: SE Iowa
Very interesting- going to try it tonight.

Thanks for sharing.

Cory

Top
#532522 - 01/21/08 06:27 PM Re: Bench Vise Baseplate Jig diagram [Re: EduMan]
paredneck Offline
trapper

Registered: 12/22/07
Loc: ne pa age 39,act 10, feel 80
My vise sucks but think I might make one for my press.thanks,
_________________________
Phil.

Top
#533527 - 01/21/08 11:59 PM Re: Bench Vise Baseplate Jig diagram [Re: paredneck]
JTfromWV Offline
trapper

Registered: 12/23/06
Loc: Sugar Grove, WV
Mine is very similar. I put dowel pins in it to keep the top and bottom halves oriented correctly and have 1/8" key stock welded to hold the baseplate material square. A hydraulic press is much easier and faster to use than a vise for this.--JT

Top
#533827 - 01/22/08 09:39 AM Re: Bench Vise Baseplate Jig diagram [Re: TexA 68 & going]
contender Offline
trapper

Registered: 06/02/07
Loc: Lake Lure NC USA
Good info and pics!
This needs to be archived!
THanks!
_________________________
"a tax is a fine for doing good, and a fine is a tax for doing bad!"

Top

Moderator:  tmrschessie