Wilderness Trapping Archive


No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum


~Catalog~

Print Thread
Hop To
Page 5 of 6 1 2 3 4 5 6
Re: Marten fleshing and boarding question? [Re: FishinHank] #2855885
11/28/11 06:13 PM
11/28/11 06:13 PM
Joined: Dec 2008
Posts: 1,997
Kelowna BC Canada
trapper ron Offline
trapper
trapper ron  Offline
trapper

Joined: Dec 2008
Posts: 1,997
Kelowna BC Canada
Originally Posted By: FishinHank
I have a question. I know a lot of guys use pretty thick stretchers, but mine are only about 1/4" thick ( I use the marten/mink stretchers from MTP). Does anyone think that I could get docked because they on thinner stretchers?


All of my boards are just a bit over 1/4 inch, probably 5/16 , as are most of the BC trappers. The newer boards I have made are a bit thicker and tapered to the nose. We use a belly wedge that is 3/4" at the base and tapered to the nose.

If anything you will gain size with a thin board, to your advantage. Once the pelt comes off the board and is drummed it would be doubtful if anyone could tell what thickness board you used.


Member BCTA
Trapping Instructor

"It's what you learn after you know it all that really counts."
Re: Marten fleshing and boarding question? [Re: trapper ron] #2855892
11/28/11 06:17 PM
11/28/11 06:17 PM
Joined: Dec 2008
Posts: 1,997
Kelowna BC Canada
trapper ron Offline
trapper
trapper ron  Offline
trapper

Joined: Dec 2008
Posts: 1,997
Kelowna BC Canada
Just got done pelting a marten, one of the few on my line again this season. I will take pictures of the different ways for handling the tails and feet so we are all on the same page. Yeah he will have lots of pin holes when done boarding him several times. smile


Member BCTA
Trapping Instructor

"It's what you learn after you know it all that really counts."
Re: Marten fleshing and boarding question? [Re: Farm Boy] #2856046
11/28/11 07:40 PM
11/28/11 07:40 PM
Joined: Dec 2008
Posts: 4,421
Yukon
Y
yukon254 Offline
trapper
yukon254  Offline
trapper
Y

Joined: Dec 2008
Posts: 4,421
Yukon
Ron is correct, we have both talked to quite a number of instructors, graders, and others involved in the fur auctions. I had some very interesting conversations with personnel from both NAFA, and FH. While I got the impression that they would prefer to see tails spread, their bottom line is that it will not make any difference in price as long as the tail is dry.

I then asked the question of what would happen with a marten pelt with no tail, as long as there was no other damage. ( I have had marten with no tails graded damaged before) Common sense would say that if the tails are not graded it should not matter at all in final price. I was then told by a fellow from NAFA, that a marten tail has a value of about $10. I found that fact very interesting. That means on a $100 marten, 10% of the value is in the tail..... yet they dont grade them. He went on to say that buyers count on those tails, and it would be bad if trappers started chopping off the tails.

The answer that made the most sense to me came from a fellow at Fur Harvesters. He said a grader will spend just seconds on each pelt, and when a marten pelt is between sizes, the pelt that has been handled very well has a far greater chance of going up a size than one that is just average. He went on to say that good fur handling always pays.

My personnel conclusion is that I will continue to spread the tails, and ship to FH.


do unto others as you would have them do unto you

www.grizzlycreeklodge.com
Re: Marten fleshing and boarding question? [Re: Farm Boy] #2856337
11/28/11 09:16 PM
11/28/11 09:16 PM
Joined: Mar 2007
Posts: 35,102
McGrath, AK
W
white17 Offline

"General (Mr.Sunshine) Washington"
white17  Offline

"General (Mr.Sunshine) Washington"
W

Joined: Mar 2007
Posts: 35,102
McGrath, AK
MArten tails are used to make artist's paint brushes. Most 'sable' brushes start at about $35. They don't require much of the tail to make an expensive brush


Mean As Nails
Re: Marten fleshing and boarding question? [Re: white17] #2856416
11/28/11 09:35 PM
11/28/11 09:35 PM
Joined: Dec 2008
Posts: 1,997
Kelowna BC Canada
trapper ron Offline
trapper
trapper ron  Offline
trapper

Joined: Dec 2008
Posts: 1,997
Kelowna BC Canada
Originally Posted By: white17
MArten tails are used to make artist's paint brushes. Most 'sable' brushes start at about $35. They don't require much of the tail to make an expensive brush


Is that why you use crayons ? smile


Member BCTA
Trapping Instructor

"It's what you learn after you know it all that really counts."
Re: Marten fleshing and boarding question? [Re: Farm Boy] #2856504
11/28/11 10:04 PM
11/28/11 10:04 PM
Joined: Mar 2007
Posts: 35,102
McGrath, AK
W
white17 Offline

"General (Mr.Sunshine) Washington"
white17  Offline

"General (Mr.Sunshine) Washington"
W

Joined: Mar 2007
Posts: 35,102
McGrath, AK
You bet ! Much cheaper !


Mean As Nails
Re: Marten fleshing and boarding question? [Re: Farm Boy] #2857482
11/29/11 12:25 PM
11/29/11 12:25 PM
Joined: Dec 2007
Posts: 5,513
juneau, alaska
A
alaska viking Offline
"Made it two years not being censored"
alaska viking  Offline
"Made it two years not being censored"
A

Joined: Dec 2007
Posts: 5,513
juneau, alaska
Ron, the weasel I refer to was sent with a couple dozen taken 3-4 years ago, short-tails. that was the year weasel went very high. I think I averaged $6.80, with a couple nearing $9.00.
I had one graded dmgd. that brought .75, and as such assumed it was the one, (the only one), that didn't have a tail.
Perhaps the reason the prices where so high that year was to fill a special order?


Made it almost 3 years without censor!

Re: Marten fleshing and boarding question? [Re: alaska viking] #2858119
11/29/11 07:42 PM
11/29/11 07:42 PM
Joined: Dec 2008
Posts: 1,997
Kelowna BC Canada
trapper ron Offline
trapper
trapper ron  Offline
trapper

Joined: Dec 2008
Posts: 1,997
Kelowna BC Canada
Originally Posted By: alaska viking
Ron, the weasel I refer to was sent with a couple dozen taken 3-4 years ago, short-tails. that was the year weasel went very high. I think I averaged $6.80, with a couple nearing $9.00.
I had one graded dmgd. that brought .75, and as such assumed it was the one, (the only one), that didn't have a tail.
Perhaps the reason the prices where so high that year was to fill a special order?


From my experience with the ermine grading I'm going to say that it was not that one. My best guess. not seeing the all of the ermine is that there was one with a taint or shedding fur. Damaged can also be one that still had some brown, that shows on the leather, one with a hole that was sewn up. bite marks from another ermine, mice or birds, or a tear after drying. Again only suggestions.

If there are ermine without tails and they do go into another lot, everything else being equal, they should bring more than 75 cents.


Member BCTA
Trapping Instructor

"It's what you learn after you know it all that really counts."
Re: Marten fleshing and boarding question? [Re: Farm Boy] #2870725
12/06/11 01:04 PM
12/06/11 01:04 PM
Joined: Oct 2011
Posts: 0
MONTANA
M
MT_B Offline
trapper
MT_B  Offline
trapper
M

Joined: Oct 2011
Posts: 0
MONTANA
Hey Everyone,
Wondering if you leave the fur in only to get skin dry to the touch, then turn it fur out for stretching?? I'm a complete rookie at this and don't want to ruin my furs when/if I get any. I can't really get a solid answer from the local fur buyer.
Feel free to PM me if you want.


2012/13 Season:
Marten: 4
Re: Marten fleshing and boarding question? [Re: MT_B] #2870772
12/06/11 01:28 PM
12/06/11 01:28 PM
Joined: Jul 2009
Posts: 2,793
100 Mile House, BC Can
bctomcat Offline
trapper
bctomcat  Offline
trapper

Joined: Jul 2009
Posts: 2,793
100 Mile House, BC Can
[quote=Montana_Brent]Hey Everyone,
Wondering if you leave the fur in only to get skin dry to the touch, then turn it fur out for stretching??

Yes and it only takes few hours if you have good air circulation. If it gets to dry just wrap in a damp towel for 10 - 15 minutes to soften it up and then turn. It will dry fine after this damping treatment.


The only constant in trapping is change so keep learning.






Re: Marten fleshing and boarding question? [Re: bctomcat] #2870799
12/06/11 01:50 PM
12/06/11 01:50 PM
Joined: Oct 2011
Posts: 0
MONTANA
M
MT_B Offline
trapper
MT_B  Offline
trapper
M

Joined: Oct 2011
Posts: 0
MONTANA
Yes and it only takes few hours if you have good air circulation. If it gets to dry just wrap in a damp towel for 10 - 15 minutes to soften it up and then turn. It will dry fine after this damping treatment. [/quote]

Thanks for the info. Is it safe to dry them in an uninsulated outdoor shed with no heat?? I could turn a small milk crate heater on.


2012/13 Season:
Marten: 4
Re: Marten fleshing and boarding question? [Re: MT_B] #2870815
12/06/11 01:59 PM
12/06/11 01:59 PM
Joined: May 2007
Posts: 852
Ontario
holdengr Offline
trapper
holdengr  Offline
trapper

Joined: May 2007
Posts: 852
Ontario
Originally Posted By: Montana_Brent


Thanks for the info. Is it safe to dry them in an uninsulated outdoor shed with no heat?? I could turn a small milk crate heater on.


Probably would dry but why mess with it. Dry them in the house, next to no bad odor off marten.

Re: Marten fleshing and boarding question? [Re: Farm Boy] #2870835
12/06/11 02:15 PM
12/06/11 02:15 PM
Joined: Mar 2009
Posts: 40
Western Wyoming
DT7 Offline
trapper
DT7  Offline
trapper

Joined: Mar 2009
Posts: 40
Western Wyoming
Brent you may already know this but if you didn't this may help. When you catch marten in a bodygrip trap, don't take the trap off of a frozen critter, take an extra trap and swap them out. A lot of rookies ruin fur trying to take the trap off a frozen marten.


"They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."

Benjamin Franklin
Re: Marten fleshing and boarding question? [Re: Farm Boy] #2870844
12/06/11 02:19 PM
12/06/11 02:19 PM
Joined: Nov 2007
Posts: 895
Alaska
P
Pittu Offline
trapper
Pittu  Offline
trapper
P

Joined: Nov 2007
Posts: 895
Alaska
If it's cold enough in the shed it actually works bette for me. I put them out in my arctic entry in say 15 degrees and they are ready to turn in about 24 hours. If you forget and go 48 hours they can still be turned. I've tried it both ways and I like the flexibility of being able to do it the next day since I'm usually skinning late at night after everyone goes to bed.

Re: Marten fleshing and boarding question? [Re: Farm Boy] #2870885
12/06/11 02:51 PM
12/06/11 02:51 PM
Joined: Oct 2011
Posts: 0
MONTANA
M
MT_B Offline
trapper
MT_B  Offline
trapper
M

Joined: Oct 2011
Posts: 0
MONTANA
DT7- I have read that and planned on doing that. Thanks for the heads up though. Its amazing how delicate the fur is on them.


2012/13 Season:
Marten: 4
Re: Marten fleshing and boarding question? [Re: DT7] #2870892
12/06/11 02:57 PM
12/06/11 02:57 PM
Joined: Dec 2006
Posts: 1,268
Takotna AK
T
takotna Offline
trapper
takotna  Offline
trapper
T

Joined: Dec 2006
Posts: 1,268
Takotna AK
Originally Posted By: DT7
When you catch marten in a bodygrip trap, don't take the trap off of a frozen critter, take an extra trap and swap them out.


And that is why conni's won't work for me, would of needed a bit over 2doz extra traps yesterday to replace them instead of 2doz extra sets, just saying..........

Re: Marten fleshing and boarding question? [Re: Farm Boy] #2874867
12/08/11 11:39 AM
12/08/11 11:39 AM
Joined: Oct 2011
Posts: 0
MONTANA
M
MT_B Offline
trapper
MT_B  Offline
trapper
M

Joined: Oct 2011
Posts: 0
MONTANA
What are the thoughts on freeze drying? And does anyone have a good description of exactly what it is?

I got my first marty yesterday! He is still frozen solid hanging in the shed, head down. I don't want to thaw him until I know exactly hot i'm going to dry him.

[img:left][/img]
[img:left][/img]


2012/13 Season:
Marten: 4
Re: Marten fleshing and boarding question? [Re: Farm Boy] #2874997
12/08/11 01:01 PM
12/08/11 01:01 PM
Joined: Dec 2007
Posts: 5,513
juneau, alaska
A
alaska viking Offline
"Made it two years not being censored"
alaska viking  Offline
"Made it two years not being censored"
A

Joined: Dec 2007
Posts: 5,513
juneau, alaska
Lots of orange on that one! I've used the freeze dry method on beaver before, but only because they can be really greasy and I was out of sawdust. You need pretty cold temps for it to work. You shouldn't need to use that method on marten, though. They are very thin-skinned, lean, and dry quickly.


Made it almost 3 years without censor!

Re: Marten fleshing and boarding question? [Re: Farm Boy] #2887198
12/15/11 01:38 AM
12/15/11 01:38 AM
Joined: Oct 2011
Posts: 0
MONTANA
M
MT_B Offline
trapper
MT_B  Offline
trapper
M

Joined: Oct 2011
Posts: 0
MONTANA
Anyone have input on board size for a small female (young of year)???


2012/13 Season:
Marten: 4
Re: Marten fleshing and boarding question? [Re: Farm Boy] #2887257
12/15/11 02:29 AM
12/15/11 02:29 AM
Joined: Dec 2008
Posts: 4,421
Yukon
Y
yukon254 Offline
trapper
yukon254  Offline
trapper
Y

Joined: Dec 2008
Posts: 4,421
Yukon
A grader at FH told me to use the same board for all marten??


do unto others as you would have them do unto you

www.grizzlycreeklodge.com
Page 5 of 6 1 2 3 4 5 6
Previous Thread
Index
Next Thread

Moderated by  otterman 

Powered by UBB.threads™ PHP Forum Software 7.7.1