Ok I posted the cleaning and rusting process using Vinegar...Here is the next two steps...Dying and Waxing. The dying process will be with Black Walnuts. The Waxing process is using a homemade double boiler.

Here are the traps cleaned and rusted for dying




Black Walunts gathered last fall....


Black walnuts and water in the dye pot


Traps being added to dye pot


Dyed traps


Double boiler made from a pop corn tin and a pot with traps being added




Waxed traps being taken out...



Fuzzy picture of a wsxed trap


Waxed trap drying...



Hope this helps thoses who want to do it with out any hazardous chemicals.

This post goes hand in hand with the cleaning post http://www.trapperman.com/forum/ubbthreads.php/topics/1459836.html#Post1459836

Tom

thanks very much tom, i hope this is archived

thank you!

Great Post!!!! Just gotta love dyeing in walnuts..!

thanks. I hope this is put in the archives too.

how long do you keep each trap in the dye?

i see you only did three at time, that would take awhile using logwood,

I used logwood dye and it took about 24 hrs for about 2 dz. traps. I did all those traps a ounce.

Great post thanks

I leave the traps in the dye for half an hour up to a couple days if I get busy else where. Then dry throughly before waxing. Tom