Home

Trap ID Please

Posted By: K Slim

Trap ID Please - 09/12/14 09:01 PM


I can find any info on the trap it's self , hopefully someone will know something about it .... Thanks Kevin
Posted By: wissmiss

Re: Trap ID Please - 09/12/14 09:11 PM

Blake & Lamb double under spring. Came in 3 sizes. # 2, # 3, # 4. I'm not a good judge of trap size in pictures.

A fairly common trap. Based on condition of the trap, collector value would be minimal. Would look good hanging on your trap shed wall.
Posted By: K Slim

Re: Trap ID Please - 09/12/14 09:21 PM

Thank you wissmiss ! The jaw spread on it set is 5" , would you happen to know when about it was made ?
Posted By: wissmiss

Re: Trap ID Please - 09/12/14 09:36 PM

Made from 1930s to 1960s, or there abouts.
Posted By: K Slim

Re: Trap ID Please - 09/12/14 10:09 PM

Thank you !
Posted By: V3N

Re: Trap ID Please - 09/13/14 01:43 AM

The large square pan dates it to the 30s or 40s but a look at the pan will get you closer. These are common so cleanin g the pan to see if the stamp can be seen won't hurt the value.
Here's an older one.


Posted By: cascade

Re: Trap ID Please - 09/13/14 03:37 AM

Thanks for showing us your trap.
© 2024 Trapperman Forums