T-handle super stake driver

Is there a driver compatible with super stakes that has a t handle. Only ones I can find on FNT or MTP are the straight ones that are impossible to pull back out when in rock or through a tree root?

Eric - I do not know of any with the hardened tip like MTP sells, I have been going to get a piece of tubing and drill through it with the drill press then weld it on the driver below the strike zone. The stuff in mind has a wall thickness of about 1/8".

Stalker Fabrications or Fur Shed Fabrications would be my guess.

Thanks Sean, that's probably my best bet. I'm switching out all my rebar stakes for super stakes. Eastwood44mag, thanks I'll give them a look-see

I got one with a T-handle from John Graham. He sells T-handle drivers for both wolf fang and super stakes.

John's webpage for his drivers:

http://furcountrylures.com/montana_line_driver.php

You can't go wrong with furs he'd fabrications. A+ all the way. His t-man is rednecktrapper

Josh told me he has stopped production of drivers.

Stalkers is a fantastic piece of equipment

Thanks guys!

I got the one from fur shed fabrications. It's been fantastic so far. The other one I had with the really big t handle on top didn't last like I thought it should have.

That sucks...I wonder why. I have one of his Wolf Fang drivers and a dozen of his drags. He makes some good stiff.

Josh makes some of the best fabs on the market.
I have had nothing but best the experience ordering from josh.

I have also a wolf fang driver that Tom Stalker made got 4 years out of but typically do not use many because ground is rocky .
Good product got great service out of it.

I may order one of his line drivers... exactly what I'm looking for. Or try to fabricate one myself. Thanks Sean for the tips on fabbing one. Gonna decide which I'm gonna do.