Anyone sell Lap links the...

Does anyone sell Lap links roughly the same size of the j.c Conner stake rings ? Believe 4"x 1/2" is the measurement I'm looking for.
Thanks !

Check e-rigging.com

Standard lap link will be roughly twice as long as it is wide- inside dimensions. I doubt you'll find one the size you want.
This chart is about what is available (that I know of)
https://www.peerlesschain.com/products/Repair-Lap-Links/

This is what you want, diy, https://trapperman.com/forum/ubbthr...-stake-end-ring-homemade-jig#Post2067606

MTP 2 1/2 inches long!

those are the extra large size, 2 of the large size with a chain link in the middle works for double staking

J C sells em with a link attached. Chestnut link

To close a lap link "tighter than a Bull's butt in fly time", mash the open end shut in a vise, then whack the solid end twice one direction then twice back. This will stress relieve the steel and remove the springiness.

buy or make a bender and tack weld them closed you are a welder